There are many reasons a furnace can fail. From minor maintenance to major mechanical issues!Below, we will discuss the most common ones. This way, you will know when to call for help.

A malfunctioning thermostat

This is one of the most overlooked furnace problems. A thermostat might not work if:

• The batteries are dead
• The temperature settings are wrong
• It is wired incorrectly.

First, make sure the system is set to “Heat.” Also, the set temperature must be higher than the actual room temperature.

Maybe the thermostat screen is blank. Try changing the batteries. If this doesn’t work, the component might be faulty.You may need to find emergency furnace repair in Red Deer.

Dirty filter

A clogged filter is dangerous. It can hinder airflow in the heating system. So what happens if the air circulation is too restricted? The furnace can overheat. Then, it automatically turns off. This is a safety measure.

Dirty filters can also reduce efficiency. This places additional strain on the system’s components.

Read More: Interior Painting Mistakes That Will Cost You More

Filters should be changed as per the manufacturer’s recommendations. Typically every month.

Tripped circuit breaker

Furnaces need electricity to operate. Even those that run on natural gas or propane. The system stops when the furnace’s circuit breaker trips.

Here is what you can do:

• Check your electrical panel.
• See if one of the breakers is in the OFF position.
• If so, reset it to restore operation.

However, repeated tripping is dangerous. It could indicate a more serious electrical problem. Call a professional technician in this case.

Ignition or pilot light problems

Some older furnaces have a pilot light. Newer models have electronic ignition systems. Should either component fail, the furnace might not be able to generate heat.

A pilot light can go out because of:

• Drafts
• Dirt buildup
• Faulty thermocouples

Electronic ignition systems can malfunction due to:

• Worn parts
• Electrical problems.

Only a professional furnace technician can fix these problems.

Blower motor failure

This is the part that circulates heated air around your house. If it malfunctions, the furnace may seem to operate. But warm air cannot reach the vents.

Typical blower motor problems include:

• Loud noises
• Very low airflow
• Sporadic motor operation.

Do not ignore these warning signs. Otherwise, you will deal with complete system failure.

Faulty safety switches

Furnaces have several safety features to protect against:

• Gas leaks
• Overheating
• Other dangers.

The safety switch detects risks. If any, it switches off the furnace.

Read More: Sewer line cleaning in Denver and Essential commercial plumbing services

This ensures that your home is safe. But sometimes the switches trigger due to:

• Airflow limitations
• Dirt accumulation
• Part m

The bottom line

Simple troubleshooting can fix some problems. Others need special knowledge and equipment. First, check the:

• Thermostat
• Air filter
• Breaker
• Visible controls.

If your furnace doesn’t turn on, a technician should diagnose it.